Rear Panel Leds And Buttons; Non-Hot-Plug Pcie Riser Board Slot Definitions - HP ProLiant DL385p User Manual

Serial connector
10
FlexibleLOM ports (Shown: 4x1Gb/Optional: 2x10Gb); port 1 on right side
11

Rear panel LEDs and buttons

Item Description
UID LED/button
1
Power supply 2
2
LED
Power supply 1
3
LED
NIC activity LED
4
NIC link LED
5

Non-hot-plug PCIe riser board slot definitions

Primary
Slot - form factor
1 - FL/FH
2 - HL/FH
3 - HL/FH
Notes:
•
"Primary" denotes the riser cage is installed in the primary riser connector.
•
"Secondary" denotes the riser cage is installed in the secondary riser connector.
•
Installing the riser cages listed in the table above in either the primary or secondary riser connectors
determines the form factor of the PCI cards supported by those riser cages.
Status
Off = Deactivated
Solid blue = Activated
Flashing blue = System being managed remotely
Off = System is off or power supply has failed.
Solid green = Normal
Off = System is off or power supply has failed.
Solid green = Normal
Off = No network activity
Solid green = Link to network
Flashing green = Network activity
Off = No network link
Green = Network link
PCIe 2 riser slot description Secondary
PCIe2 x16 (8,4,1)
PCIe2 x8 (8,4,1)
PCIe2 x8 (4,1)
PCIe 2 x16 riser slot description
Slot - form factor
4 - FL/FH PCIe2 x16 (16, 8, 4, 1)
5 - HL/FH PCIe2 x16 (8, 4, 1)
6 - HL/FH PCIe2 x8 (8, 4, 1)
Component identification 14