Install the expansion board.
7.
Connect any required internal or external cables to the expansion board. See the documentation that
8.
ships with the expansion board.
Do one of the following:
9.
Install the primary PCIe riser cage (on page 31).
o
Install the secondary PCIe riser cage
o
Install the access panel (on page 25).
10.
Install the server into the rack
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Power up the server (on page 23).
14.
Installing a full-length expansion board
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 23).
3.
Remove the access panel (on page 25).
4.
If a full-length expansion board is installed in the primary PCIe riser cage, release the expansion board
5.
retainer and remove the primary PCIe riser cage (on page 29).
If a full-length expansion board is installed in the secondary PCIe riser cage, release the expansion
6.
board retainer and remove the secondary PCIe riser cage (on page 30).
Remove the expansion slot cover
7.
Install the expansion board into slot 1.
8.
Connect any required internal or external cables to the expansion board. See the documentation that
9.
ships with the expansion board.
Do one of the following:
10.
("Secondary PCIe riser cage
("Installing the server into the
("Removing the expansion slot
option" on page 74).
rack" on page 40).
blanks" on page 71).
Hardware options installation 73