Systems Insight Display Led Combinations - HP ProLiant DL385p User Manual

Item Description
NIC link/activity
2
AMP status
3
Over temp
4
All other LEDs
—

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED
indicate system status.
Systems Insight Display
LED and color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Over temp (amber)
Over temp (amber)
Fan (amber)
Fan (amber)
Power supply (amber)
Status
Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("Rear panel LEDs and
14).
Flashing green = Network link and activity
Solid green = Network link
Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
Off = Normal
Solid amber = High system temperature
detected
Off = Normal
Amber = Failure
For more information on the activation of
these LEDs, see "Systems Insight Display
LED combinations (on page 12)."
Health LED System power
LED
Red Amber
Amber Green
Red Green
Amber Green
Amber Green
Red Amber
Amber Green
Red Green
Red Amber
buttons" on page
Status
One or more of the following conditions may
exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during
POST.
Processor in socket X is in a pre-failure
condition.
One or more DIMMs have failed.
DIMM in slot X is in a pre-failure condition.
The Health Driver has detected a cautionary
temperature level.
The server has detected a hardware critical
temperature level.
One fan has failed or has been removed.
Two or more fans have failed or been
removed.
One or more of the following conditions may
exist:
Component identification 12