Systems Insight Display Led Combinations - HP ProLiant ML350 Gen9 Maintenance And Service Manual

Item Description
DIMM LEDs
3
NIC LED
4
All other LEDs

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing a
health event. Combinations of illuminated SID LEDs, the system power LED, and the health LED indicate
system status.
Systems Insight
Display LED and
color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Overtemperature (amber) Amber
Overtemperature (amber) Red
Fan (amber)
Fan (amber)
Power supply (amber)
Power supply (amber)
Power cap (off)
Power cap (green)
Status
Amber = DIMM error
Off = Normal
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) =
Network active
Off = No network activity
Off = Normal
On = Failed
Health LED System power
LED
Red Amber
Amber Green
Red Green
Amber Green
Green
Amber
Amber Green
Red Green
Red Amber
Amber Green
— Amber
— Flashing green
Status
One or more of the following conditions
might exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the
socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during
POST.
Processor in socket X is in a pre-failure
condition.
One or more DIMMs have failed.
DIMM in slot X is in a pre-failure condition.
The Health Driver has detected a cautionary
temperature level.
The server has detected a hardware critical
temperature level.
Fan has failed or is missing, but still meets
the minimum fan requirements.
Fan has failed or is missing and no longer
meets the minimum fan requirements.
•
Only one power supply installed and in
standby mode.
•
Power supply fault.
•
System board fault.
•
Redundant power supply is installed
and only one power supply is functional.
•
AC power cord is not plugged into
redundant power supply.
•
Redundant power supply fault.
•
Power supply mismatch at POST or
through hot-plug addition.
Standby
Waiting for power.
Component identification 84