Using Uefi System Utilities; Flexible Boot Control; Restoring And Customizing Configuration Settings - HP BCDVideo BCD108 User Manual

Using UEFI System Utilities

To use the System Utilities, use the following keys.
Action
Access System Utilities
Navigate menus
Select items
Save selections
Access Help for a highlighted configuration
option*
*Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
•
Upon the first system power-up
•
After defaults have been restored
Default configuration settings are sufficient for typical server operations; however, you can modify
configuration settings as needed. The system prompts you for access to the UEFI System Utilities each
time the system is powered up.

Flexible boot control

This feature enables you to do the following:
•
Add Boot Options:
o
Browse all FAT16 and FAT32 file systems.
o
To add a new UEFI boot option, select an X64 UEFI application with an .EFI extension. For
example, adding an OS boot loader or other UEFI application as a new UEFI boot option.
The new boot option is appended to the boot-order list. When you select a file, you are prompted
to enter the boot option description. This description, and any optional data to be passed to an
.EFI application, is then displayed in the boot menu.
•
Boot to System Utilities
After pre-POST, the boot options screen appears. During this time, you can access the UEFI System
Utilities by pressing the F9 key.
•
Choose between supported modes:
o
Legacy BIOS Boot Mode
o
UEFI Boot Mode
IMPORTANT: If the default boot mode settings are different than the user-defined settings,
the system may not boot the OS installation if the defaults are restored. To avoid this issue, use
the User Defined Defaults feature in UEFI System Utilities to override the factory default
settings.
For more information, see the UEFI System Utilities user guide for your product on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/UEFI/docs).

Restoring and customizing configuration settings

You can reset all configuration settings to the factory default settings, or you can restore and use the
system default configuration settings.
Key
F9 during server POST
Up and Down arrows
Enter
F10
F1
Software and configuration utilities 126