Hardware Options Installation; Introduction; Processor Option - HP DL385 - ProLiant - G5 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Processor option

The server supports single- and dual-processor operation. The server uses PPMs to provide power to each
processor.
CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
processor without using the processor installation tool.
CAUTION:
multiprocessor configurations must contain processors with the same part number.
IMPORTANT:
processor.
IMPORTANT:
properly.
To install a processor:
Power down the server (on page 23).
1.
Extend the server from the rack (on page 23).
2.
Remove the access panel (on page 24).
3.
Remove the air baffle (on page 25).
4.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To avoid damage to the processor and system board, only authorized personnel
To help avoid damage to the processor and system board, do not install the
To prevent possible server malfunction and damage to the equipment,
If upgrading processor speed, update the system ROM before installing the
Processor socket 1 must be populated at all times or the server does not function
Hardware options installation 39