Nmi Functionality; Systems Insight Display Leds And Internal Health Led Combinations; System Maintenance Switch - HP DL385 - ProLiant - G5 User Manual

Position
S5
S6
S7
S8
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.

NMI functionality

An NMI crash dump enables administrators to create crash dump files when a system is hung and not
responding to traditional debug mechanisms.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as hangs in
operating systems, device drivers, and applications. Many crashes freeze a system, and the only
available action for administrators is to cycle the system power. Resetting the system erases any
information that could support problem analysis, but the NMI feature preserves that information by
performing a memory dump before a hard reset.
To force the OS to invoke the NMI handler and generate a crash dump log, the administrator can do any
of the following:
Short the NMI jumper pins
Press the NMI switch
Use the iLO Virtual NMI feature
For additional information, see the whitepaper on the HP website
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf).
Systems Insight Display LEDs and internal health LED
combinations
When the internal health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated system LEDs and the internal health LED indicate system
status.
Default Function
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = Normal
On = ROM treats system configuration as invalid.
Off Reserved
Off Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
Component identification 15