Media drive option
Power down the server (on page 23).
1.
Remove the existing media drive option or blank.
2.
Slide the CD/DVD-ROM drive or diskette drive into the drive bay.
3.
Redundant hot-plug AC power supply option
CAUTION:
all bays are populated with either a component or a blank.
Access the product rear panel (on page 29).
1.
Remove the power supply blank.
2.
WARNING:
power supply blank to cool before touching it.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
Hardware options installation 50