Dc Power Supply Option - HP DL385 - ProLiant - G5 User Manual

Slide the power supply into the power supply bay.
3.
Connect the power cord to the power supply.
4.
Route the power cord through the power cord anchor or cable management arm.
5.
Reposition the cable management arm into the operating position.
6.
Connect the power cord to the power source.
7.
Be sure that the power supply LED is green
8.
Be sure that the front panel external health LED is green
9.

DC power supply option

("Rear panel LEDs and buttons" on page 11).
("Front panel LEDs and buttons" on page 8).
Hardware options installation 51