HP DL385 - ProLiant - G5 User Manual page 16

Systems Insight Display
LED and color
Processor failure, socket X
(amber)
PPM failure (amber)
I-PPM failure (amber)
DIMM failure, slot X (amber)
DIMM failure, all slots in one
bank (amber)
DIMM failure, all slots in all
banks (amber)
Overtemperature (amber)
Fan (amber)
Internal Health LED color
Red
Amber
Red
Red
Red
Amber
Red
Red
Red
Amber
Red
Status
One or more of the following conditions may
exist:
Processor in socket X has failed.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during
POST.
Processor in socket X is in a pre-failure
condition.
One or more of the following conditions may
exist:
PPM for processor 2 has failed.
PPM is not installed, but processor 2 is
installed.
Embedded I-PPM for processor 1 has failed.
One or more of the following conditions may
exist:
DIMM in slot X has failed.
Memory group is populated with different
DIMM types (all DIMMs are mismatched).
One or more of the following conditions may
exist:
DIMM in slot X is in a pre-failure condition.
Memory group is populated with different
DIMM types (at least one DIMM is good).
One or more DIMMs has failed. Test each
bank of DIMMs by removing all other DIMMs.
Isolate the failed DIMM by replacing each
DIMM in a bank with a known working
DIMM.
One or more DIMMs has failed. Test each
bank of DIMMs by removing all other DIMMs.
Isolate the failed DIMM by replacing each
DIMM in a bank with a known working
DIMM.
The server has detected a hardware critical
temperature level.
One fan has failed in redundant mode.
One or more of the following conditions may
exist:
One fan has failed in non-redundant mode
The minimum fan requirements are not
being met. Two or more fans have failed
or are missing.
Component identification 16