Installing The Battery-Backed Write Cache Enabler - HP DL360 - ProLiant - G3 Setup And Installation Manual

Installing the Battery-Backed Write Cache Enabler

1. Access internal server components. Refer to the "Accessing Internal Server
Components" section earlier in this chapter.
2. Align the arrows on top of the battery module with the spool location marks on
the chassis (1). Slide the battery module onto the spools and slide towards rear of
chassis to lock (2).
Figure 2-21: Installing the battery-backed write cache
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Installing Hardware Options
2-25