Rack Warnings And Cautions; Server Warnings And Cautions - HP DL360 - ProLiant - G3 Setup And Installation Manual

Planning the Server Installation

Rack Warnings and Cautions

Before installing a rack, carefully review the following warnings and cautions.
WARNING: To reduce the risk of personal injury or equipment damage, always
ensure that the rack is adequately stabilized before extending a component out
of the rack. Extend only one component at a time. A rack may become
unstable if more than one component is extended for any reason.
WARNING: To reduce the risk of personal injury or equipment damage,
ensure that:
•
•
•
•
WARNING: When installing the server in a telco rack, ensure that the rack
frame is adequately secured to the top and bottom of the building structure.
WARNING: To reduce the risk of personal injury or equipment damage, at
least two people are needed to safely unload the rack from the pallet. An
empty 42U rack can weigh as much as 115 kg (253 lb), can stand more than
2.1 m (7 ft) tall, and may become unstable when moved on its casters.
Never stand in front of the rack when it is rolling down the ramp from the
pallet. Always handle the rack from both sides.
CAUTION: Always begin by mounting the heaviest item on the bottom of the rack.
Continue to populate the rack from the bottom to the top.

Server Warnings and Cautions

Before installing the server, carefully review the following warnings and cautions.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
drives and the internal system components to cool before touching them.
1-6
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizers are attached to the rack for single-rack installation.
The racks are coupled together in multiple-rack installations.
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide