Rear Panel Led Indicators - HP DL360 - ProLiant - G3 Setup And Installation Manual

Table E-1: Identifying the Front Panel LED Indicators
Location LED
4 NIC 1 link/activity LED
5 NIC 2 link/activity LED
6 Power On/Standby
button/system power
LED

Rear Panel LED Indicators

The server rear panel contains five LEDs: one for the rear unit identification LED
switch, two for the iLO connector, and two for the RJ-45 connectors. Use the
following figure and table to identify each LED.
Figure E-2: Identifying the rear panel LED indicators
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Status
Green = Network link
Blinking = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs.
Green = Network link
Blinking = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs.
Amber = System shut down, but power still applied
Green = System on
Off = Power cord not attached or power supply failure
LEDs, Switches, and Jumpers
continued
E-3