Registering The Server; Routine Maintenance; Optional Installation Service - HP DL360 - ProLiant - G3 Setup And Installation Manual

2. Follow the on-screen instructions to complete the factory-installed operating
system initialization process. After initialization is complete, the server will
automatically go through POST.
3. Install the HP Management Agents on the server. Refer to Chapter 4, "Server
Configuration and Utilities," and the HP Management CD for information about
installing the HP Management Agents for the operating system installed on the
server.
4. After the server configuration is complete, back up the server.
5. Install any application software.
6. Register the server. Refer to "Registering the Server."

Registering the Server

For server registration information, refer to the Server Setup and Management pack
that ships with the server, or register the HP server online at
www.hp.com/servers/proliant/manage
If configuring the server with SmartStart, use the Server Profile Diskette to register
after performing the configuration. Simply follow the instructions on the HP website
and insert the Server Profile Diskette when prompted.

Routine Maintenance

For information concerning routine maintenance and safety precautions, refer to the
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide.

Optional Installation Service

HP offers an optional installation service for installing rack products. The installation
service can be customized to meet the specific requirements of the customer, or it can
be ordered as a CarePaq. The installation service covers the entire hardware
installation process, from unpacking the components to routing the cables and
running a system test.
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Server Installation
3-15