Remove The Server Blade - HP ProLiant BL490c - G6 Server User Manual

without exiting applications and the OS. This is an emergency method to force a shutdown in the
event of a hung application.
•
Use the HP BladeSystem Onboard Administrator GUI to initiate a shutdown:
Select the Enclosure Information tab, then select the Overall checkbox in the Device Bays item.
a.
Initiate a shutdown from the Virtual Power menu:
b.
—
Select Momentary Press to initiate a controlled shutdown of applications and the OS.
—
Select Press and Hold to initiate an emergency shutdown of applications and the OS.
IMPORTANT:
provided. To remove all power from the server blade, remove the server blade from the
enclosure.
After initiating a virtual power down command, be sure that the server blade go into standby mode by
observing that the system power LED is amber.

Remove the server blade

CAUTION:
support the weight of the server blade by handling the chassis directly. Improper use can
damage the release lever and the server blade.
To remove the component:
Identify the proper server blade.
1.
Power down the server blade (on page 11).
2.
Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
WARNING:
internal system components to cool before touching them.
When the server blade are in standby mode, auxiliary power is still being
Do not use the server blade release lever to lift or carry the server blade. Always
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Operations 12