HP ProLiant BL490c - G6 Server User Manual page 34

•
Install Type II mezzanine cards only on mezzanine 2 connector.
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see the system board components (on page 7).
For mezzanine card signal mapping, see "Interconnect bay numbering and device mapping (on page
15)."
To install the component:
Power down the server blade (on page 11).
1.
Remove the server blade (on page 12).
2.
Remove the access panel (on page 13).
3.
Remove the mezzanine connector cover.
4.
Install the mezzanine card. Press down on the connector to seat the board.
5.
Install the access panel (on page 13).
6.
Install the server blade
7.
("Installing a server blade" on page 17).
Hardware options installation 34