Retaining The Recovery Key/Password - HP ProLiant BL490c - G6 Server User Manual

CAUTION:
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to
ensure the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
5.
on page 7).
Install the TPM security rivet by pressing the rivet firmly into the system board.
6.
Install the access panel (on page 13).
7.
Install the server blade
8.
Power up the server blade (on page 11).
9.

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
Any attempt to remove an installed TPM from the system board breaks or disfigures
("Installing a server blade" on page 17).
("System board components"
Hardware options installation 36