Connecting To The Network; Installing A Server Blade - HP ProLiant BL490c - G6 Server User Manual

Connecting to the network

To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
(http://www.hp.com/go/bladesystem/interconnects).

Installing a server blade

CAUTION:
or the enclosure unless all hard drive and device bays are populated with either a component
or a blank.
Remove the device bay blank.
1.
To prevent improper cooling and thermal damage, do not operate the server blade
Setup 17