Chapter 3: 24 Hours Reports; Event Summary Report - Enterasys Intrusion Prevention System Reporting Manual

The 24 Hours reports display information about events that have occurred over the last 24 hours.
You can display the 24 Hours reports by selecting 24 Hours from the Reporting menu bar. Two
reports are available: the Event Summary report and the Event Log report.
For information about...

Event Summary Report

Event Log Report
Setting Display Preferences
Customizing 24 Hours Report Tables
Event Summary Report
The Event Summary report lists each event that has occurred in the last 24 hours only once, but
gives you the number of times it has occurred during the last 24 hours (in the Count column) and
the hours in which it occurred (in the green bullets in the hour columns).
describes the columns in the Event Summary report.
You can filter the data in the report by selecting an existing filter from the Filter drop down list, or
by creating a new report filter, as described in
Note: A warning that a script is running slowly will sometimes display when generating a report with
a high event count.
Workaround: For Firefox, select the checkbox to not see this warning again. For Internet Explorer,
see http://support.microsoft.com/kb/175500.
24 Hours Reports
"Creating and Editing Report
Enterasys IPS Analysis and Reporting Guide 3-1
3
Refer to page...
3-1
3-2
3-4
3-4
Table 3-1 on page 3-2
Filters" on page 1-10.