Interfaces Tab - Enterasys Intrusion Prevention System Reporting Manual

System Dashboard

Interfaces Tab

The Interfaces tab displays information about the network interfaces of Enterasys IPS systems and
sensors in the Enterasys IPS environment. By default, interface information is grouped in this table
by system. Refer to
about changing the default display options.
Table 2-6
You can display details about a specific interface by selecting the interface and clicking the double
arrow button at the bottom right of the tab, as shown in
Figure 2-3 The Interfaces Tab
Table 2-6 Interface Tab Columns
Column Header
Status
Status Message
Last Heartbeat On
Event Rate (per sec)
"Sorting, Filtering, and Grouping In
on page 2-9 describes the type of data shown in the Interfaces tab table columns.
Columns" on page 2-15 for information
Figure 2-3
Description
The Up/Down link status of the port.
Refer to Table 2-4 on page 2-6.
The last time a heartbeat event was received from the system.
Events generated for traffic received on this interface.
Enterasys IPS Analysis and Reporting Guide 2-9
The Tabbed Panel
on page 2-9.