Using The Floppy Disk - Brother KE-436C Instruction Manual

Electronic lockstitch pattern tacker with stepping foot and programming function
Hide thumbs Also See for KE-436C:
Table of Contents

Advertisement

5. USING THE OPERATION PANEL

5-2. Using the floppy disk

Compatible types of floppy disk
Data type
BAS-300E data
BAS-300F series
KE-436B,436C
Tajima embroidery data
Old BAS-300A data
Old BAS-300 data
BAS-300E data can be used when sewing with the KE-436C, but the data resolution will be limited to 0.1 mm per pulse.
The above four types of data can all be read, but when writing to disk, all data is automatically converted to BAS-300E data
when writing to 2HD disks and BAS-300A data when writing to 2DD disks.
When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk. (The programmer can be used to
format these disks. Refer to the programmer instruction manual for details.)
TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-300E data.
Restrictions when using 2DD floppy disks and KE-436C data
In order to maintain compatibility with the old BAS-300A data, the following restrictions have been placed on the use of the
new functions which have been added to the E series.
Restricted function
Resolution
Low-speed conversion
Split function during
embroidering
Needle down stop
for split
Expansion option output
19
No. of stitches programmed
20,000 stitches per pattern
100 pattern Up to a maxi-
mum of 360,000 stitches
50,000 stitches per pattern
4,000 stitches per pattern
10 patterns
Up to a maximum of
40,000 stitches
2,000 stitches per pattern
10 patterns
Up to a maximum of
20,000 stitches
A series (2DD)
0.1 mm/pulse
2 types
(400 and 1,200 revolutions)
Not available
Not available
Not available
Data resolution
0.05 mm/pulse
0.1 mm/pulse
0.1 mm/pulse
0.2 mm/pulse
E, F series (2HD)
0.05 mm/pulse
4 types (400, 600, 800
and 1,200 revolutions)
Available
Available
Available
KE-436C
Disk
Format
2HD
1.44 MB
Automatically
2DD
formatted
KE-436B, 436C (2HD)
0.1 mm/pulse
4 types (400, 600, 800
and 1,200 revolutions)
Available
Available
Not available
Write enabled
Yes
No
Yes
No
Applicable command
[668] L
[669] L
[220] L
[230] L
[221] L
[231] L

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents