Installing The Needle Sub Plate - Brother KE-436C Instruction Manual

3-17. Installing the needle sub plate

2599Q 1. Install the four needle sub plate supports (1) with the four
screws (2).
2. Insert the needle sub plate (3) from the front of the
machine so that it is level.
Note:
Insert the needle sub plate (3) so that the X feed lever
cap (4) sits on top of the needle sub plate (3).
3. Install the needle sub plate (3) with the four screws (5).
4. Loosen the screws (2) and make fine adjustments to the
height of the needle sub plate (3) so that it is at the same
height as the needle plate (6).
2600Q
5. Provisionally secure the two auxiliary plate supports (7)
with the washers (8) and the screws (9) and (10), and
then firmly tighten the screws (9) and (10) in that order.
2601Q
KE-436C
3. INSTALLATION
14