Using The Operation Panel; Explanation Of Panel - Brother KE-436C Instruction Manual

5. USING THE OPERATION PANEL

5. USING THE OPERATION PANEL

5-1. Explanation of panel

(1) POWER indicator................... When the power is turned on, the indicator lights to show that the power is on.
(2) PROGRAM No. display.......... Displays the program number 00 - 99.
(3) Program select switch............ Used to select the program number when reading a program from or writing a program to
(4) Program Read/Write switch ... Used to read a program from floppy disk, or to write a newly programmed stitch pattern to
(5) Display screen ....................... Used to display data such as menus, errors and memory switch settings.
(6) Menu switch........................... Used to select the desired menu ( scale, speed, bobbin thread counter, split No.). One of
(7) X-SCALE indicator................. Illuminates when X-scale mode has been selected using the menu switch (6).
(8) Y-SCALE indicator................. Illuminates when Y-scale mode has been selected using the menu switch (6).
(9) SPEED indicator .................... Illuminates when speed mode has been selected using the menu switch (6).
17
disk.
floppy disk.
Up to ten patterns (00 - 99) can be stored on each disk.
the indicators (7) - (11) illuminates to indicate the menu selected, and the setting for that
menu then appears on the display screen (5).
The illuminated indicator changes in the following order each time the switch is pressed.
X-SCALE indicator (7)
B.T. COUNTER indicator (10) SPLIT NO. indicator (11)
KE-436C
Y-SCALE indicator (8)
2687Q
SPEED indicator (9)