Selection Of Data; Registration Of Embroidery Data From Floppy Disk - Brother BES-963 Instruction Manual

Selection of Data

Select data in order to start sewing.
Register embroidery data from a floppy disk into the machine memory.
Data to use for actual embroidering is selected from data registered in the machine
memory. A maximum of 45 kinds or 480,000 stitches of embroidery data can be
registered in the machine memory; however, depending on the combination of
embroidery data, the number of total stitches available may become less.
When using data in a floppy disk or in BE-100, register it in the machine memory
once before selection.
If there is no space in the machine memory, delete unnecessary data to make a
space.
Data in a floppy disk
Data created by BE-100

Registration of Embroidery Data from Floppy Disk

Types of data to be registered are as shown below.
• DOS-formatted data
Data format
ECS
Tajima
Barudan
Zanks (DSK)
Data received from BE-100
BES-963BC • BES-1263BC
Registration
Sewing
Extension
Data with a name of [xxxx.ECS]
Data with a name of [xxxx.DST]
Data with a name of [xxxx.DSB]
Data with a name of [xxxx.DSZ]
Data with a name of [xxxx.STH]
(These icons are displayed in the lower right of the screen.)
Chapter 3 Selection of Data and Embroidering
Machine memory
Reading
Icon
59