Removing The Hp Netserver Lh 3R System Board - HP D7171A - NetServer - LPr Installation Manual

Chapter 1

Removing the HP NetServer LH 3r System Board

Remove the system board from the NetServer chassis to upgrade the processor
modules. The system board is secured to the chassis by two retaining latches (see
Figure 1-7).
Figure 1-7. HP NetServer LH 3r System Board
1. Lift the retaining latches to release the system board from its socket.
2. Lift the system board out of the NetServer, and place it component side up
on the anti-static mat. Lay the system board flat, with the metal crosspiece
on the top rear corner of the system board extending off the work surface
(see Figure 1-8).
10
Processor Module Installation
System Board
Retaining Latches