Removing The Hp Netserver Lh 3R System Board; Removing The Bezel - HP D7171A - NetServer - LPr Installation Manual

Chapter 1

Removing the HP NetServer LH 3r System Board

The bezel and cover panels must be removed to access the system board.

Removing the Bezel

The bezel shown in Figure 1-3 has three clips that mount onto a hinge assembly,
which is secured to the NetServer chassis.
1. Turn off the HP NetServer and disconnect the power cord and telephone
cord.
2. To remove the bezel, pull it toward you until it comes free.
Figure 1-3. Removing the HP NetServer LH 3r Bezel
6
Processor Module Installation