C Batch Menu; Batch Menu - HP D6030A - NetServer - E50 User Manual

C Batch Menu

Batch Menu

The Batch Menu allows users to specify what tests to run as well as how many
times to repeat a particular test.
Edit Batch Parameters
Selecting this option is the same as pressing <F2> from the main menu. This
option allows you to specify different groups of parameters: Parameters for all
tests, Repeat Counts, and Batch mode parameters. Repeat count applies to the
count each test will be run on a per pass bases. For example if you had the Serial
Port Test's repeat count = 5, and you had the total passes = 3, the test would run
15 times.
Load Batch Parameters
Selecting this option is the same as pressing <F3> from the main menu. This
option allows you to load previously saved batch parameters in an ASCII file
with an .INI file extension. The parameters that are loaded include information
on the tests that have been selected for batch mode execution, the batch mode run
time option (time bound, pass bound, or continuous), the error logging option,
the error log file name and heading, and other test parameters.
Save Batch Parameters
Selecting this option is the same as pressing <F4> from the main menu. This
option allows you to save your current configuration parameters in an ASCII file
with an .INI file extension. These parameters can later be loaded and executed
from within DiagTools or from a command line as follows -
AMIDIAG /R AMIDIAG.INI
With the /R parameter, DiagTools will automatically execute the batch, then
return to the command line once the batch has been completed. The parameters
that are saved include information on the tests that have been selected for batch
mode execution, the batch mode run time option (time bound, pass bound, or
continuous), the error logging option, the error log file name and heading, and
other test parameters. Please note that a test must be selected for parameter
information to be saved on that test.
79