HP D6030A - NetServer - E50 User Manual page 62

Chapter 5
Code Description
0606h DiagTools Error
0607h DiagTools Error
0608h FIFO register test
failed at port
XXXXh.
0609h FIFO trigger level
test failed at port
XXXXh.
0610h FIFO character
timeout indication
test failed at port
XXXXh.
0611h FIFO data transfer
test failed at port
XXXXh.
0612h Baud rate speed
test failed.
0613h Infrared Register
test failed at port
XXXXh.
0614h Infrared Interrupt
ID test failed at
port XXXXh.
0615h DiagTools Error
0616h Infrared Line Status
test failed at port
XXXXh.
0617h Infrared Data
Transfer test failed
at port XXXXh.
0701h Parallel Port Test
Failed
0702h IRQ Activation test
failed at port
XXXXh.
0704h A register
Write/Read test
failed at port
XXXXh.
0705h A register FIFO test
failed at port
XXXXh.
0706h DiagTools Error
0707h DiagTools Error
0708h DiagTools Error
0801h DiagTools Error
0802h DiagTools Error
58
Recommended Action
Report error to HP Customer Care Center and get the latest version of DiagTools.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Possible system board failure.
Possible system board failure.
Possible system board failure.
Possible system board failure.
Possible system board failure. If the test is running on a 16650 UART, make sure
that the clock frequency selected in the menu matches the jumper settings on the
card.
Possible system board failure.
Replace the system board
Report error to HP Customer Care Center and get the latest version of DiagTools.
Replace the system board
The test indicates that the system board is not working properly. Contact your
support provider for more details.
Possible system board failure.
Possible system board failure.
Possible system board failure.
Possible system board failure.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Report error to HP Customer Care Center and get the latest version of DiagTools.
Error Message Reference