HP D6030A - NetServer - E50 User Manual page 54

Chapter 5
Code Description
0322h Floppy Speed
Error.
0340h Seek operation
failed.
0341h Undefined or
invalid command in
Random Test.
0342h Address mark not
found in Random
Test
0344h Requested sector
not found in
Random Test.
0345h Reset failed in
Random Test.
0347h Drive parameter
activity failed in
Random Test.
0348h DMA overrun error
in Random Test.
0349h Attempt to DMA at
64 KB boundary in
Random Test.
0350h CRC or ECC data
error in Random
Test.
0360h Seek operation
failed in Random
50
Recommended Action
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
3. Change the floppy drive.
4. Change the system board.
1. Try a different diskette.
2. Check the cable between the floppy drive and the system board.
Error Message Reference