Select The Utility Partition; Main Menu In Text Mode; Running The Basic Tests - HP D6030A - NetServer - E50 User Manual

Error reference and user guide
Hide thumbs Also See for D6030A - NetServer - E50:
Table of Contents

Advertisement

Chapter 4
CAUTION
Before you reboot the server be sure users have been warned and network
operations shut down gracefully, if possible.
2. Reboot the NetServer and watch the console screen for the Utility Partition Prompt. When
you see the prompt, press F12 to enter the Utility Partition. Confirm the command if
requested.
3. Nine items are presented in the menu. Use the keyboard arrow keys to highlight "HP
DiagTools for NetServers" on that list. Press Enter. Skip ahead to "Main Menu in Text
Mode."

Select the Utility Partition

CAUTION
DiagTools can only be used off-line. This means you must reboot the HP
NetServer you will be running DiagTools on. If possible, alert users and
gracefully shut down network operations before rebooting.
Reboot your HP NetServer. As the boot screens roll by, watch for an opportunity to select the
choice to boot from the Utility Partition (by pressing function key F12). Nine items are presented in
the menu. Use the keyboard arrow keys to highlight "HP DiagTools for NetServers" on that list.
Press Enter.

Main Menu in Text Mode

You can select from the following choices once DiagTools is running:
1. Run Basic Systems Tests
2. Go to Advanced to select individual tests
3. Create Support Ticket
4. Save Support Ticket to a floppy
5. Misc Menu (Viewers)
6. Exit DiagTools
If you only want DiagTools to check your system to see that all components are detected, see
"Getting a Configuration Report" later in this chapter.

Running the Basic Tests

1. Select
1. Run Basic Systems Tests
to run the DiagTools
2. When the test is completed, a message will display at the top of the screen informing you of
the result. When the result is "passed" you may press any key to use any other feature of
DiagTools.
When the result is "failed" you are prompted to look at test results. To do so, you will press
any key, then select
5. Misc Menu
18
Running DiagTools in the Text Mode (from the Utility Partition)

Advertisement

Table of Contents
loading

Table of Contents