Table of Contents
Advertisement
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use
only the approved Nickel-metal Hydride battery (Ni-MH),
which is compatible with this unit .
1. Make sure the telephone is OFF (not in TALK mode) before you replace
battery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery
pack from the handset .
4. Insert the new battery pack and connect the cord to the jack inside the
battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base to charge. Allow the handset battery to
properly charge (for 16 hours) prior to first use or when you install a
new battery pack. If you do not properly charge the phone, battery
performance will be compromised.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the Nickel-metal
Hydride battery listed in the User's Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
Display Messages
The following messages show the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
BLOCKED NUMBER
CALL SCREENING
CHARGING...
Indicates the person is calling from a number
which is blocked from transmission.
Indicates you may use the handset to screen
calls before answering the call.
Indicates the handset needs to charge for a
period of time before it can resume normal
function.
Advertisement
Table of Contents
