Ringer Tone; Ringer Volume; Key Tone; Reset Setting - RCA 2112 User 's guide User Manual

Ringer Tone

You may choose from five ringer tones and five melodies.
From the Sound Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the RINGER TONE
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays
10. 01 is default setting.
3. Use the caller ID-volume ( or ) button to scroll to the desired setting (1
through 10). You will hear a sample of the ringer tone/melody you select .
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone.
5. NOTE: You must have the Ringer Volume set to ON for ring tone to signal
an incoming call.

Ringer Volume

From the Sound Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the RINGER
VOLUME sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays
RING VOLUME 2.
3. Use the caller ID-volume ( or ) button to scroll to your selection. LEVEL
2 is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the screen displays the ringer off icon.

Key Tone

From the Sound Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the KEY TONE sub-
menu.
2. Press mute/menu OK button to enter the menu. The screen displays > ON
OFF.
3. Use caller ID-volume ( or ) button to scroll to your selection. ON is the
default setting.
4. Press the mute/menu OK button to confirm and the screen displays the
key tone setting.

Reset Setting

1. Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press caller ID-volume ( or ) button to scroll to RESET SETTINGS.
1 OF