Remote Access; Cordless Handset; Handset - RCA 2112 User 's guide User Manual

To erase all previously played Messages in a mailbox:
1. Make sure the phone is OFF (not in TALK mode)
2. Press and hold the delete button until "ALL OLD MESSAGES ERASED" is
announced.
To erase a message with the handset:
1. Press flash/answerer button to access the answering system. The screen
displays ANSWERER REMOTE ACCESS.
2. Press the play/stop (Key 2] on the handset.
3. Press the delete button on the handset to erase a message during
playback.
NOTE: Erased messages cannot be restored.

Remote Access

You may access the answering system with the cordless handset or from any
tone-dial compatible telephone.

Cordless Handset

Use the corresponding handset keys just like you would use the base buttons
(see "Answering System Setup"). The button functions are located on the
handset above each number key. For example, to play messages:
• Press the flash/answerer button to access the answering system.
• Press the PLAY/STOP button to play the message.
• When you are finished listening to your messages, press the END button to
exit .
Screening Calls from the Handset
Use the handset to screen calls even when you can't hear the answering
system.
When the answering system picks up:
1. Press the flash/answerer button to access the answering system.
2. Listen as the caller leaves a message.
3. Press the TALK/SPEAKER buttons to speak to the person or press the END
button to stop screening the call.