Table of Contents
Advertisement
3. Use the caller ID-volume ( or ) button to scroll to your selection. The
default setting is RECORD MSGS.
4. Press the mute/menu OK button to confirm. You will hear a confirmation
tone and the new setting shows in the display.
Ring to Answer
This feature lets you select the number of times you want the phone to ring
before the answering system answers a call.
From the Answerer Menu:
1. Press the caller ID-volume ( or ) button to scroll to
ANSWER sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays RING
TO ANSWER 3 4 5 6 TS.
3. Use the caller ID-volume ( or ) button to scroll to your selection. The
default setting is 5.
4. Press the mute/menu OK button to confirm. You will hear a confirmation
tone and the screen displays the new setting.
NOTE: If you select Toll Saver (TS) the unit answers after the
3rd ring if there are NEW messages, OR the unit answers
after the 5th ring if there are NO new messages. This allows
users to access their answerer from another location and
then hang up after 4 rings to save long distance charges.
Message Alert
This feature sets your answering system to give an alert tone every 10
seconds when there are new messages.
From the Answerer Menu:
1. Press the caller ID-volume (
ALERT sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays ON
OFF.
3. Use the caller ID-volume (
default setting is OFF.
4. Press the mute/menu OK button to confirm. You will hear a confirmation
tone and the screen displays the new setting.
Security Code
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access, and
it prevents unauthorized access to your answering system.
or
) button to scroll to the MESSAGE
or
) button to scroll to ON or OFF. The
the RING TO
Advertisement
Table of Contents
