Voicemail; All Settings; Telephone Operation; Visual Indicators - RCA 2112 User 's guide User Manual

Dect 6.0 multi-handset speakerphone answering system
Table of Contents

Advertisement

4. Press mute/menu OK button to confirm and you may program the
following items: Voicemail, All Settings.

Voicemail

From the Reset Settings Menu:
1. Press the caller ID-volume ( or ) button to scroll to the VOICEMAIL
sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen displays
YES NO. The default setting is YES.
3. Use the caller ID-volume ( or ) button to move the cursor to YES or
NO.
NOTE: If YES is selected, new voicemail icon is cleared from the LCD
and the VMWI LED is turned OFF (on ALL handsets, and the charge/in
use LED on the base).
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone.

All Settings

As you become familiar with this system, you may prefer to use the system's
original settings. Follow the steps below to return to the factory default
settings.
From the Reset Settings Menu:
1. Press the caller ID-volume ( or ) button to scroll to the ALL
SETTINGS sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen displays
YES
NO. The default setting is NO.
u
3. Use the caller ID-volume ( or ) button to move the cursor to YES or
NO.
NOTE: If you choose YES all the settings in the programmable menu
are returned to factory default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone.

Telephone Operation

Visual Indicators

Base
The charge/in use indicator on the base will flash to alert you to an incoming
call, during paging, or if you have a message waiting from your service
provider. The indicator will remain lit when a handset is in the base charging or
when the line is in use.
Handset

Advertisement

Table of Contents
loading

Table of Contents