Installing The Phone; Installing The Handset Battery; Base Station - RCA 2112 User 's guide User Manual

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use only
the approved Nickel metal Hydride batt ery (Ni-MH)(Brand
n a m e : S A N I K , M o d e l n a m e : 2 S N - A A A 5 5 H - S - J 1 , C a p a c i t y :
2.4V/550mAh; Brand name: BYD, Model name: H-AAA550BX2,
Capacity: 2.4V/550mAh; Brand name: Corun, Model name: NI-MH
AAA550*2, Capacity: 2.4V/550mAh), that is compatible with this
unit.
1. Locate battery and battery door which are packaged together inside a
plastic bag and are separate from the handset .
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the
connector is keyed and can be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into
place.

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C),
and place your cordless telephone on a level surface, such as a desktop or
tabletop, or you may mount it on the wall.