Table of Contents
Advertisement
Transferring External Calls to Other
Handsets
During an external call, you may transfer the external call to another handset .
1. Press the delete/int/conf button on the originating handset to put an
external call on hold, and enter the paged handset number.
2. A long beep is heard and then the two handsets are immediately
connected. Receiving handset shall immediately come into the auto
intercom mode that both "microphone" and "speaker " of this receiving
handset shall be enabled such that the user of receiving handset can freely
talk and listen to the conversation.
3. When the receiving handset connects, press the END button on the
originating handset to transfer the call.
Caller ID (CID)
IMPORTANT: In order to use this unit's Caller ID features, you must
subscribe to either the standard Name/Number Caller ID Service or
Call Waiting Caller ID Service. To know who is calling while you are
on the phone, you must subscribe to Call Waiting Caller ID Service.
This unit receives and displays information transmitted by your local phone
company. This information can include the phone number, date, and time; or
the name, phone number, date, and time.
signal
strength
time
Caller ID
phone number
Call Waiting Caller ID
Provided you subscribe to Call Waiting Caller ID service from your phone
company; if you receive an incoming call and you are using the RCA multi
handset system, a beep indicates the presence of a Call Waiting call on the
line. The Call Waiting Caller ID information will be displayed and stored in the
history of all handsets in the system.
• When you hear the call waiting beep in the handset receiver, press the
flash button to put the current call on hold and answer the incoming call.
Press the flash button to return to the original call.
new call
battery
date
Caller ID name
Advertisement
Table of Contents
