Registration; De-Registration - RCA 2112 User 's guide User Manual

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the AUTO TALK
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays > NO
YES.
3. Use the caller ID-volume ( or ) button to scroll to your selection. NO is
the default setting.
4. Press the mute/menu OK button to confirm.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not
recommended that a handset be registered again unless absolutely
necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the REGISTRATION
sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen displays
YES NO. The default setting is NO.
3. Use the caller ID-volume ( or ) button to scroll to YES or NO.
4. If you select YES, press t h e mute/menu OK button. The screen displays
HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your
handset should be held near the base during registration process.)
5. Press and hold the find button on the base unit , the charge/in use indicator
flashes. Press the handset mute/menu OK button. The screen displays
REGISTERING, and then the screen displays REGISTERED. You may
now rename your handset. (Refer to Step of Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.

De-Registration

De-registration cancels registration. During the de-registration process, keep
the handset near the base.
From the Initial Setup Menu:
1. P r e s s t h e c a l l e r I D - v o l u m e (  o r  ) b u t t o n t o s c r o l l t o t h e
DEREGISTRATION sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen displays
YES NO. The default setting is NO.
u
3. Use the caller ID-volume ( or ) button to scroll to YES or NO.