Global De-Registration; Sound Setup - RCA 2112 User 's guide User Manual

WARNING: It is not recommended that a handset be de-
registered unless absolutely necessary because once a
handset is de-registered, that handset's telephone features
cannot be used until the handset is re-registered.
4. Select NO, if you do not want to de-register.
5. If you select YES, press t h e mute/menu OK button and MOVE NEAR BASE
displays for seconds, then the screen displays YES NO.
6. Use the caller ID-volume ( or ) button to scroll to YES or NO.
7. If you select Y E S , press th e mute/menu O K button to confirm. The screen
displays DE-REGISTER.... You will hear a confirmation tone. Then the
screen displays DEREGISTERED to confirm the handset is deregistered.
NOTE: When you complete the de-registration process, HANDSET
NEEDS REGISTRATION shows in the display. To use the handset ,
you MUST re-register the handset using the Registration process.

Global De-registration

If one or more handsets become lo s t , you should de-register all handsets to
ensure proper system operation.
WARNING: It is not recommended that a handset be de-
registered unless absolutely necessary because once a
handset is de-registered, that handset's telephone features
cannot be used until the handset is re-registered.
1. Disconnect power from the base by pulling the plug out of the back of the
unit .
2. Press and hold the find button and while holding the find button reconnect
the power.
3. Continue to hold the find button until the charge/in use light flashes
rapidly.
4. Release the find button.
5. Press and release the find button on the base once. All handsets are de-
registered and the screen displays HANDSET NEEDS REGISTRATION.

Sound Setup

1. Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press caller ID-volume ( or ) button to scroll to SOUND SETUP.
4. Press mute/menu OK button to confirm and you may program the
following items: Ringer Tone, Ringer Volume, Key Tone.