Area Code; Tone/Pulse; Language; Auto Talk - RCA 2112 User 's guide User Manual

5. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the current time shows in the display.

Area Code

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the AREA CODE
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays SET
AREA CODE - - -.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press the mute/menu OK button to confirm. You will hear a confirmation
tone and the screen displays the new area code.
NOTE: To restore the default setting to - - -, press and release delete/
int/conf when the screen displays SET AREA CODE.

Tone/Pulse

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the TONE/PULSE
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays TONE
PULSE. The default setting is TONE.
3. Use the caller ID-volume ( or ) to select TONE or PULSE.
4. Press the mute/menu OK button to confirm. You will hear a confirmation
tone and the screen displays your selection.

Language

From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the LANGUAGE
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays
ENGLISH ESPANOL.
3. Use the caller ID-volume ( or ) button to scroll to the desired language.
ENGLISH is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the screen displays the selected language.

Auto Talk

When this function is ON, during an external call, you may lift the handset to
answer a call immediately without pressing any buttons.
To end a call, put the handset back on the base cradle directly.