NOTE: If you make a mistake press the delete/int/conf button to
backspace and erase the wrong character(s) or number(s).
4. Press the mute/menu OK button again to save your selection. The screen
displays ENTER NUMBER.
5. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses), and press the mute/menu button to confirm and
advance SET MELODY sub-menu.
6. Use the caller ID-volume ( or ) button to select from melody 01 to
melody 10 (a testing tone is generated while making melody selection).
7. P re s s m u t e / m e n u O K b u t t o n t o c o n f i r m , t h e re c o rd s a re s t o re d
alphabetically in the phone book.
Inserting a Pause in the Dialing Sequence (of a Stored
Number)
Press the #pause/ringer button on the handset's touch-tone pad to insert a
delay in dialing sequence when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a computer access
tone.) Each pause counts as one digit in the dialing sequence.
Edit Records
From Phonebook Sub-Menu:
1. Use the caller ID-volume ( or ) button to scroll to EDIT RECORDS.
2. Press the mute/menu OK button to confirm, the screen displays the
records.
3. Use the caller ID-volume ( or ) button or key in alphabet to move
to desired record, press mute/menu OK button to confirm. The screen
displays ENTER NAME.
4. Repeat Steps 3 through 7 in "Add Records" section.
Delete Records
From Phonebook Sub-Menu:
1. Use the caller ID-volume ( or ) button to scroll to DELETE RECORDS.
2. Press the mute/menu OK button to confirm, the screen displays the
records.
3. Use the caller ID-volume ( or ) button or key in alphabet to move
to desired record, press the delete/int/conf button. The screen displays
DELETE?.
4. Press the delete/int/conf button again to confirm.
NOTE: If you don't want to change or delete a record, simply press
the END button, or wait for one minute to exit automatically.