Cr_Rcode Command; Cr_Rsens Command; Cr_Rtype Command; Cr_P-Mane Command - Sanyo PLC-WM4500/L - 4500 Lumens Manual

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications

9.11.21 CR_RCODE Command

Command "CR_RCODE" [CR]
Details Get selected Remote Control Code
Acceptable
Response
%1
Unacceptable

9.11.22 CR_RSENS Command

Command "CR_RSENS" [CR]
Details Get selected location of infrared remote receiver of remote control
Acceptable
Response
%1
Unacceptable

9.11.23 CR_RTYPE Command

Command "CR_RTYPE" [CR]
Details Get status of supported Remote Control (IR/RF).
Acceptable
Response
%1
Unacceptable

9.11.24 CR_P-MANE Command

Command "CR_P-MANE" [CR]
Details Get setting status of Power management
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"001" --------------------------- Code 1 is selected
"002" --------------------------- Code 2 is selected
"003" --------------------------- Code 3 is selected
"004" --------------------------- Code 4 is selected
"005" --------------------------- Code 5 is selected
"006" --------------------------- Code 6 is selected
"007" --------------------------- Code 7 is selected
"008" --------------------------- Code 8 is selected
"Error Code" [CR]
"000_%1" [CR]
"ALL" -------- Select top, front and back receiver of projector
"FRONTTOP" ----- Select front and top receiver of projector
"BACKTOP" -------- Select back and top receiver of projector
"FRONTBACK" ---- Select front and back receiver of projector
"FRONT" ----- Select only front receiver of projector
"TOP" --------- Select only top receiver of projector
"BACK" ------- Select only back receiver of projector
"Error Code" [CR]
"000_%1" [CR]
"IR" -------- IR
"RF" ------- RF (cannot be returned as this model supports only
IR remote control)
"Error Code" [CR]
"000_%1" [CR]
"OFF" ------------------------ Power Management is disabled
"READY" -------------------- Power Management is set to Ready
"SHUTDOWN" ------------ Power Management is set to Shut
Down mode
"Error Code" [CR]
71/78