Cr_Offset-B Command; Cr_Sharp Command; Cr_Gamma Command; Cr_Nzred Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications

9.4.12 CR_OFFSET-B Command

Command "CR_OFFSET-B" [CR]
Details Get user controlled Blue value of Offset
Acceptable
Response
Unacceptable

9.4.13 CR_SHARP Command

Command "CR_SHARP" [CR]
Details Get user controlled value of Sharpness
Acceptable
Response
Unacceptable

9.4.14 CR_GAMMA Command

Command "CR_GAMMA" [CR]
Details Get user controlled value of Gamma
Acceptable
Response
Unacceptable

9.4.15 CR_NZRED Command

Command "CR_NZRED" [CR]
Details Get Noise Reduction setting status
Acceptable
Response
Unacceptable

9.4.16 CR_PROGV Command

Command "CR_PROGV" [CR]
Details Get Progressive scan setting status
Acceptable
Response
Unacceptable
"000_%1" [CR]
%1 "000" – "063"
"?" [CR]
"000_%1" [CR]
%1 "000" – "031"
"?" [CR]
"000_%1" [CR]
%1 "000" – "015"
"?" [CR]
"000_%1" [CR]
"ON" --------------------------- Noise Reduction is ON
%1
"OFF" ------------------------- Noise Reduction is OFF
"Error Code" [CR] -----------When command is invalid in the given
condition (such as being selected input)
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"ON" ------------------------------ Set Progressive scan On
%1 "FILM" ----------------------------- Select FILM mode
"OFF" ------------------------------ Set Progressive scan Off
"Error Code" [CR] -----------When command is invalid in the given
condition (such as being selected input)
"?" [CR] --------- When unknown command is received
43/68