Cr_Nmslot1 Command; Cr_Nmslot2 Command; Cr_Nmslot3 Command; Cr_Nmslot4 Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications

9.7.9 CR_NMSLOT1 Command

Command "CR_NMSLOT1" [CR]
Details Get the board name inserted to Slot1
Acceptable
Response
Unacceptable

9.7.10 CR_NMSLOT2 Command

Command "CR_NMSLOT2" [CR]
Details Get the board name inserted to Slot 2
Acceptable
Response
Unacceptable

9.7.11 CR_NMSLOT3 Command

Command "CR_NMSLOT3" [CR]
Details Get the board name inserted to Slot 3
Acceptable
Response
Unacceptable

9.7.12 CR_NMSLOT4 Command

Command "CR_NMSLOT4" [CR]
Details Get the board name inserted to Slot 4
Acceptable
Response
Unacceptable

9.7.13 CR_IDSLOT1 Command

Command "CR_IDSLOT1" [CR]
Get ID information on Slot 1.This command is used to recognize the inserted
Details
board and specify the valid Input source.
Response Acceptable
"000_%1" [CR]
"HDCP-DVI2" -------------------- Input1/ New HDCP&DVI board
"5BNC-VIDEO"------------------- Input2/ New Video board
"VGA" ----------------------------- VGA D-Sub board
"NETWORK" -------------------- NETWORK board
%1
"5BNC" ---------------------------- Component board
"DUAL-SDI" -------------------- HD&SD-SDI board
"HDCP-DVI" -------------------- HDCP&DVI board
"NOTERMINAL" -------------- There is no board inserted
"?" [CR]
"000_%1" [CR]
%1 The same data as CF_NMSLOT1
"?" [CR]
"000_%1" [CR]
%1 The same data as CF_NMSLOT1
"?" [CR]
"000_%1" [CR]
%1 The same data as CF_NMSLOT1
"?" [CR]
"000_%1" [CR]
52/68