Cr_Logo Command; Cr_Logolock Command; Cr_Fanspeed Command; Cr_Rcode Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

9.10.5 CR_LOGO Command

Command "CR_LOGO" [CR]
Details Get Logo setting status
Acceptable
Response
Unacceptable

9.10.6 CR_LOGOLOCK Command

Command "CR_LOGOLOCK" [CR]
Details Get setting status of Logo Lock function
Acceptable
Response
Unacceptable

9.10.7 CR_FANSPEED Command

Command "CR_FANSPEED" [CR]
Details Get currently selected Fan Control Speed
Acceptable
Response
%1
Unacceptable

9.10.8 CR_RCODE Command

Command "CR_RCODE" [CR]
Details Get currently selected Remote Control code
Acceptable
Response
%1
Unacceptable

9.10.9 CR_RSENS Command

Command "CR_RSENS" [CR]
Details Get selected location of infrared remote receiver of remote control
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"DFLT" ----------------------------- Default Logo is enabled
%1 "USER" --------------------------- User is enabled
"OFF" ------------------------------ Off is enabled
"?" [CR]
"000_%1" [CR]
"ON" --------------------------- Logo Lock is ON
%1
"OFF" ------------------------- Logo Lock is OFF
"Error Code" [CR]
"000_%1" [CR]
"MAX" -------------------- Max speed of Fan Control is selected
"NOR" -------------------- Normal speed of Fan Control is selected
"?" [CR]
"000_%1" [CR]
"001" -------------------------- Code1
"002" -------------------------- Code2
:
"007" -------------------------- Code7
"008" -------------------------- Code8
"?" [CR]
"000_%1" [CR]
"BOTH" --------Select both front and back receiver of projector
"FRONT" ----- Select only front receiver of projector
"BACK" ------- Select only back receiver of projector
"?" [CR]
87/105