Cr_Rcode Command; Cr_Rsens Command; Cr_P-Mane Command; Cr_P-Manetime Command - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Expand Serial Command Functional Specifications

9.10.30 CR_RCODE Command

Command "CR_RCODE" [CR]
Details Get currently selected Remote Control code
Acceptable
Response
Unacceptable

9.10.31 CR_RSENS Command

Command "CR_RSENS" [CR]
Details Get selected location of infrared remote receiver of remote control
Acceptable
Response
Unacceptable

9.10.32 CR_P-MANE Command

Command "CR_P-MANE" [CR]
Details Get setting status of Power management
Acceptable
Response
Unacceptable

9.10.33 CR_P-MANETIME Command

Command "CR_P-MAETIME" [CR]
Details Get setting time for starting Power Management function
Acceptable
Response
Unacceptable

9.10.34 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get Direct on setting status
Acceptable
Response
Unacceptable
"000_%1" [CR]
"001" -------------------------- Code1
"002" -------------------------- Code2
%1 :
"007" -------------------------- Code7
"008" -------------------------- Code8
"?" [CR]
"000_%1" [CR]
"ALL" -------- Select top, front and back receiver of projector
"FRONTTOP" ----- Select front and top receiver of projector
"BACKTOP" -------- Select back and top receiver of projector
%1 "FRONTBACK" ---- Select front and back receiver of projector
"FRONT" ----- Select only front receiver of projector
"TOP" --------- Select only top receiver of projector
"BACK" ------- Select only back receiver of projector
"?" [CR]
"000_%1" [CR]
"OFF" ------------------------ Power Management is disabled
%1 "READY" -------------------- Power Management is set to Ready
"SHUTDOWN" -----Power Management is set to Shut Down mode
"?" [CR]
"000_%1" [CR]
%1 "001 – 030" ----------------------- 1 to 30 minutes
"?" [CR]
"000_%1" [CR]
"ON" -------------------------- Direct on is set to ON.
%1
"OFF" ------------------------ Direct on is set to OFF.
"?" [CR]
94/105