Table of Contents
Advertisement
NetVanta 1335 Series Hardware Installation Guide
4.
OPTION MODULES
The NetVanta 1335 Series support several option modules designed to meet a variety of networking
requirements. The option modules include plug-in NIMs and plug-on DIMs.
NIMs are cards that plug directly into the option module slot located on the rear of the base unit. These cards
provide the following types of interfaces:
•
NetVanta 56K/64K NIM (P/N 1200861L1) on page 22
•
NetVanta T1/FT1 NIM (P/N 1202862L1) on page 23
•
NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1) on page 24
•
•
NetVanta E1/FE1 NIM (P/N 1200868E1/L1) on page 26
•
•
NetVanta Serial NIM (P/N 1200866E1) on page 28
•
NetVanta SHDSL NIM, Annex A (P/N 1200936E1) on page 29
•
NetVanta SHDSL NIM, Annex B (P/N 1200937E1) on page 30
•
NetVanta ADSL NIM, Annex A (P/N 1202869E1) on page 31
•
NetVanta ADSL NIM, Annex B (P/N 1202889E1) on page 32
•
•
NetVanta USB WWAN NIM (P/N 1700803G1) on page 35
DIMs are plug-on cards that plug directly on to the NIM prior to installation into the base unit. A DIM must be
plugged on to a NIM in order for the interfaces on the NIM to be active. The NetVanta supports the following
DIMs:
•
NetVanta Analog Modem DIM (P/N 1200864L1) on page 36
•
NetVanta ISDN BRI DIM (P/N 1200865L1) on page 37
•
NetVanta ISDN S/T DIM (P/N 1200875L1) on page 38
This section describes each module, providing individual card specifications and features. Refer to
on page 53
for pinouts.
Installing Dial Backup and Network Interface Modules on page 42
on card installation.
61700515E2-34C
Copyright © 2011 ADTRAN, Inc.
Option Modules
Appendix A
provides information
21
Advertisement
Table of Contents
