Set-Up; Connecting The Printer Cable - Kyocera TASKalfa 820 Operation Manual
Printing system (w) operation guide (setup edition)
Hide thumbs
Also See for TASKalfa 820:
- Operation manual (124 pages) ,
- User manual (95 pages) ,
- Service manual (521 pages)
Table of Contents
Advertisement
2
Set-up
Connecting the printer cable
When using this machine as a local printer, use a parallel cable or a USB cable as a printer cable to
connect this machine to a computer.
IMPORTANT:ALWAYS turn the main power switch of the machine OFF BEFORE connecting the
printer cable.
1
Turn the main power switch located on the rear left of
this machine OFF (
computer to be connected.
2
Connect the printer cable to the parallel interface
connector or the USB interface connector located on
the rear right of this machine.
3
Connect the other side of the printer cable to the parallel interface or the USB interface of the
computer.
4
). Also, turn off the power of the
Advertisement
Table of Contents
