Changing/Deleting Settings by Requirement
To change or delete the settings by requirement, follow the steps below.
Raising the Priority of Settings by Requirement
To raise the priority of the settings by requirement, follow the steps below.
1
Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2
Select the requirement name to be deleted or
changed.
To delete the requirement name, go to the next
step. To change the requirement name, go to step
4.
3
Press [Delete]. When the confirmation screen is
displayed, press [Yes] and go to step 6.
4
Press [Detail].
5
Refer to steps 5 to 26 of Using Rule for Specific RX
on page 4-22 to change the settings.
6
When the deletion or change is completed, press
[OK].
1
Follow steps 1 to 3 of Using Rule for Specific RX on
page 4-22.
2
Select the requirement name to be reprioritized.
3
Press [Raise Priority].
The priority of the selected requirement is raised.
4-27
FAX Operation (Advanced)
4