Kyocera TASKalfa 8000i Operation Manual page 48

Sub Address
Transmission Start
Speed
ECM
Encrypted
Transmission
Selecting the Density
Adjust the density when scanning originals.
Density
Lighter
-3 -2
Original : A4
Zoom : 100%
-2.5
:
Send A4
Preview
Add Shortcut
Status
Select of Original Image
Select the original image.
Key
To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-45.
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM (error correction mode) prevents distortion
of the fax image by automatically resending any
parts of the data that were not correctly sent due
to the effects of noise on the telephone line during
transmission. To change the ECM communication
setting, press this key.
To send faxes using encryption, press this key.
For details, refer to Encryption on page 6-29.
Destination
Normal Darker
-1 0 +1 +2 +3
-1.5 -0.5 +0.5 +1.5 +2.5
Cancel OK
Description
1
Press [Color/Image Quality], and then [Density].
You can see a preview of the image to be sent by
pressing [Preview]. For details, refer to Previewing
Images on page 3-24.
2
Select the density.
The density can be selected in 13 levels from -3
(lighter) to +3 (darker). In Quick Setup, the density
is in seven levels. To adjust the density in 13 levels,
press [More].
3
Press [OK].
10/10/2010
1
Press [Image Quality], and then [Original
Image].You can see a preview of the image to be
sent by pressing [Preview]. For details, refer to
Previewing Images on page 3-24.
3-8
FAX Operation (Basic)